Isenberg - 160.4420CP - 3/4 '' Thermostatic Valve & Trim - With 2-Way Diverter - 2 Output

Isenberg

Price: $945.00

Call for availability

Questions about Isenberg - 160.4420CP
The plumbing professionals at Monique's Bath Showroom are available to assist you with your selection of Isenberg products.

Special Order Item - Contact us for availability:

Watertown, MA  617-923-1167  

Isenberg - 160.4420CP

The 160.4420 Thermostatic valve features 3/4'' NPT connections and has 2 water outputs (ports) which are operable one at a time without shared port operation. This product meets CAL-Green Compliance. There are 3 settings or positions on the top handle of this product. They are as follows: Position 1 - Output 1 Active Position 2 - Output 2 Active Position 3 - OFF - No Water Flow The bottom handle sets the temperature. Supply Stops - There are two safety stops at each water inlet to prevent water flow in case of installation and repairs. Handle Operation - The bottom handle is used to control the temperature of water flowing through the outlet. The top handle is capable of controlling the volume of water from full flow to a trickle by turning from ''OFF'' position to either ''1'' or ''2'' As the valve is installed, care should be taken to maintain proper distance from the back of the valve to the finished tile which should be between 2.77'' and 3.44'' inches (Rough In Spec). Also the value must be installed straight and not at an angle or upside down. In case, the tile is thicker or valve is installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve. Cut Out Dimensions - The cut out in wall should be 6.49 X 4.44 Inches and no more – this will ensure that the trim plate will cover the cut out hole in the wall. Trims - The trims comprise of a well finished cover plate and handle knobs. The trim plate is used to cover the wall and has markings for 1/OFF/2 and HOT/COLD. Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, temperature of the water is regulated. Covering this ring is the handle knob which has a push button on the side. In order to adjust the water temperature, one needs to press this button and move the handle to hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position – as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles.

Finish: Chrome
Collection: Serie 160
UPC: 634392346462
Online Product ID: 2702199
Length: 5.51"
Width: 4.76"
Height: 8.26"
Made In: US
Style: Contemporary,Modern
Made in USA: Yes
Warranty: Limited Lifetime Warranty. See Warranty page for complete details.
Handles: 2
Shipping: L:11"x W:11"x H:9" 8.15 lbs.

ADDITIONAL PRODUCT INFORMATION:

  • Solid Brass Construction
  • Includes Thermostatic Valve - TVH.4420F
  • Valve Includes Integral Service Stops
  • 2 Output Ports
  • Extensions Available - TVH.4101Exx

Professional delivery is available for every product we sell. We would be happy to coordinate delivery for you!

160.4420CP - Isenberg

Monique's Bath Showroom is proud to present this Chrome Shower Faucet Trim, by Isenberg. The 160.4420CP is made from premium materials, this Shower Faucet Trim offers great function and value for your home. This fixture is part of Isenberg's Serie 160 Collection, so make sure to check out other fixtures to accessorize your room.

Isenberg Bath Corporation / Isenberg faucets offers a full and extensive range of plumbing fixtures certified for sale in the United States & Canada. It’s North American distribution center is in Irving TX. All items are shipped from that location. Isenberg plumbing fixtures and faucets generally come in a modern / contemporary style. Isenberg offers complete ranges of products for the bathroom including single hole faucets, 8” widespread faucets, and extensive range of thermostatic shower valves, hand showers, brass showerheads and more. All products within a collection / series are matching for the enthusiast who has an eye for designing a perfectly coordinated bathroom. Isenberg products are made in ISO certified and IAPMO audited foundry’s and are independently tested and certified by IAPMO and carry the UPC logo. Isenberg products and components are made in several countries including Germany, Italy, China and Hungary. Plumbing fixtures and valves are expected to last a lifetime. That is why Isenberg has instituted a deep and rigorous forging, casting and assembly process for all Isenberg products. Isenberg employs a distinct design / sourcing, manufacturing and assembly process. Products are conceptualized and designed collectively in the United States, Europe and Asia to ensure that we are able to offer quality product with a world-class standard with input from experts at various Isenberg locations. Isenberg uses best-in-class cartridges from well known cartridge manufacturers including Fluhs, Kerox and Sedal. All cartridges are off the shelf designs and can be provided on demand. Isenberg is also a Watersense Partner and committed to technology that conserves water usage. Isenberg's faucets and showerheads consistently use 20-30% less water than industry requirements.Isenberg offers a limited lifetime warranty on its products within the United States and its full warranty policy can be viewed on its website www.isenbergfaucets.com.

Isenberg Warranty

View More Products from the Serie 160 Collection